Operation and maintenance of KraussMaffei injection molding machines

Training course code: KM B1

Level: Basic course

Number of trainees: approx. 8 Number of trainees: 5 persons maximum

Topics

  • Basic setup and control of the machine
  • Identification and correction of minor defects of mechanical and electrical components of the machine
  • Identification and correction of basic machine setup problems
  • Machine maintenance

Optimum setup and control of the machine including quick and professional troubleshooting of minor problems that may occur during machine operation.

This training course is composed of a theoretical and a practical part. Training materials are provided for the theoretical part. The KM80/380CX machine is available and used for the practical training at KUBOUŠEK s.r.o. If the training is required directly at the customer, a machine must be available for this purpose.

Course duration: 3 days, from 8 am to 4 pm

Preconditions: No special knowledge is required.

Operation and maintenance of KraussMaffei injection molding machines

Training course code: KM E1

Level – Extension course

Number of trainees: approx. 8 Number of trainees: 5 persons maximum

Topics

  • Basic setup and control of the machine
  • Identification and correction of minor defects of mechanical and electrical components of the machine
  • Identification and correction of basic machine setup problems
  • Machine maintenance
  • Core setting
  • Core programming
  • Chart setup
  • Quality inspection

Optimum setup and control of the machine including quick and professional troubleshooting of minor problems that may occur during machine operation.

This training course is composed of a theoretical and a practical part. Training materials are provided for the theoretical part. The KM80/380CX machine is available and used for the practical training at KUBOUŠEK s.r.o. If the training is required directly at the customer, a machine must be available for this purpose.

Course duration: 2 days, from 8 am to 4 pm

Preconditions: Knowledge is required on the level of the training course KM B1 for the relevant control system.

Training course for setters and technologists working on KraussMaffei machines

Training course code: KM ST

Level – Special course

Number of trainees: approx. 8 Number of trainees: 5 persons maximum

Topics

  • Basic setup and control of the machine
  • Special setup and control of the machine
  • Identification and correction of machine setup problems related to the machine functions and technological setup
  • Cycle parameter monitoring setup
  • SPC
  • Standard quality monitoring setup
  • Practical setup and use of the graphic packet

Optimum setup and control of the machine including quick and professional troubleshooting of minor problems that may occur during machine operation.

This training course is composed of a theoretical and a practical part. Training materials are provided for the theoretical part. The KM80/380CX machine is available and used for the practical training at KUBOUŠEK s.r.o. If the training is required directly at the customer, a machine must be available for this purpose.

Course duration: 3 days, from 8 am to 4 pm

Preconditions: Knowledge is required on the level of the training course KM B1 for the relevant control system.

Maintenance of KraussMaffei machine electric installations

Training course code: KM SE

Level – Special course

Number of trainees: approx. 8 Number of trainees: 5 persons maximum

Topics

  • Basic setup and control of the machine
  • Identification and correction of faults of electric and electronic components of the machine
  • Identification and correction of basic machine setup problems in connection with the machine functions
  • Machine maintenance
  • Reading in wiring diagrams
  • Reading the spare parts catalogue
  • MC3F, MC4, MC5 or MC6 control principle
  • Functions of individual MC3F, MC4, MC5 or MC6 control cards

Optimum setup and control of the machine including quick and professional troubleshooting of minor problems that may occur during machine operation.

This training course is composed of a theoretical and a practical part. Training materials are provided for the theoretical part. The KM80/380CX machine is available and used for the practical training at KUBOUŠEK s.r.o. If the training is required directly at the customer, a machine must be available for this purpose.

Course duration: 3 days, from 8 am to 4 pm

Preconditions: Knowledge is required on the level of the training course KM B1 for the relevant control system.

Hydraulic and mechanical maintenance of KraussMaffei machines

Training course code: KM SH

Level: Basic course

Number of trainees: approx. 8 Number of trainees: 5 persons maximum

Topics

  • Basic setup and control of the machine
  • Identification and correction of defects of machine hydraulic and mechanical component
  • Identification and correction of basic machine setup problems in connection with the machine functions
  • Machine maintenance
  • Orientation in hydraulic diagrams
  • Orientation in the drawings of mechanical parts of the machine
  • Reading the spare parts catalogue
  • MC3F, MC4, MC5 a MC6 control principles in terms of hydraulic functions
  • Diagnostic options of the hydraulic system

Optimum setup and control of the machine including quick and professional troubleshooting of minor problems that may occur during machine operation.

This training course is composed of a theoretical and a practical part. Training materials are provided for the theoretical part. The KM80/380CX machine is available and used for the practical training at KUBOUŠEK s.r.o. If the training is required directly at the customer, a machine must be available for this purpose.

Course duration: 3 days, from 8 am to 4 pm

Preconditions: Knowledge is required on the level of the training course KM B1 for the relevant control system.

Registration for the Training

var ss_form = {‘account’: ‘MzawMDG3MLI0BAA’, ‘formID’: ‘SzS1MLNIskjSTTG0SNY1MbY017VMSjXXTU02SU02NjFPBnIA’};
ss_form.width = ‘100%’;
ss_form.height = ‘1000’;
ss_form.domain = ‘app-3QNKFVWV5U.marketingautomation.services’;
// ss_form.hidden = {‘field_id’: ‘value’}; // Modify this for sending hidden variables, or overriding values
// ss_form.target_id = ‘target’; // Optional parameter: forms will be placed inside the element with the specified id
// ss_form.polling = true; // Optional parameter: set to true ONLY if your page loads dynamically and the id needs to be polled continually.